Samsung LE19D450G1W Instrukcja Obsługi
Strona 5
English - 5
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and antenna.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the Red button.
1
Selecting a language
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the desired OSD (On Screen Display) language.
P
POWER
2
Selecting Store Demo
or Home Use
Press the
◄ or ► button, then press the
ENTER
E button.
Select the Home Use mode. Store Demo mode is for retail
environments.
To return the unit’s settings from Store Demo to Home Use (standard):
Press the volume button on the TV. When the OSD volume is displayed,
press and hold
MENU
for 5 sec.
Store Demo is only for shop display. If you select it, several functions
are not able to use. Please select Home Use when you watch at home.
3
Selecting a country
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the appropriate country.
✎
After selecting the country in the Country menu, some models may proceed with an
additional option to setup the pin number.
✎
When you input the PIN number, 0-0-0-0 is not available.
4
Setting the Clock
Mode
Set the Clock Mode automatically or manually.
5
Selecting an antenna
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select Air (Digital & Analogue/Digital/Analogue) or Cable (Digital & Analogue/Digital/
Analogue).
6
Selecting a channel
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the channel source to memorise. When setting the antenna source to Cable, a step
appears allowing you to assign numerical values (channel frequencies) to the channels. For
more information, refer to Channel
→ Auto Tuning.
Press the
ENTER
E button at any time to interrupt the memorisation process.
7
Enjoy your TV.
Select the Watch TV. Press the
ENTER
E button.
If You Want to Reset This Feature...
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to
change the PIN number, use the Change PIN function.
You should do Plug & Play (
MENU
→ System) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets
the PIN to “0-0-0-0” (France : “1-1-1-1”) :
MUTE
→ 8 → 2 → 4 →
POWER
(on)
TV Rear Panel
VHF/UHF Antenna
Cable
or
* It may differ depending on the model.
Power Input
[LD450-XH]BN68-03394D-L09.indb 5
2011-03-01 �� 9:59:22