Samsung DSB-S305 - Instrukcja (Strona 23)

GB-4 D I G I T A L S A T E L L I T E R E C E I V E R GB-5
DSB-S305G
GB
DSB-S305G
CONNECTING YOUR “STB”
1. LOCATION OF THE RECEIVER
Your STB should be placed under proper ventilation.
Don’t put in completely enclosed cabinet that will restrict the flow of air,
resulting in overheating.
The location should be safeguarded from direct sunlight, excess moisture,
rough handling or household pets.
Avoid stacking other electronic components on the top of the receiver.
The location should be safely accessible by the cable from your antenna system.
2. CONNECTING THE RECEIVER WITH DISH SYSTEM
After installing your antenna system, connect the coaxial cable from the LNB
of your antenna to “DISH INPUT” terminal marked at the rear of the STB.
All cable connectors should be finger tightened; do not use any kind of wrench
while tightening connectors. The cable should be 75ohm impedance coaxial
twisted at the end with an “F” type connector.
3. CONNECTING THE RECEIVER TO TV
To connect the receiver with your television, you can use Scart Cable.
In the case of connecting your TV through SCART cable, connect the SCART
connector marked TV to the respective SCART port on the TV.
4. CONNECTING YOUR VCR
To connect a VCR or DVD player, the STB has been provided with SCART at the
rear marked “AV2 (EXT)”.
Using a SCART connector, the VCR or DVD player can be connected to the receiver.
N No otte e : For detailed information, refer to the manual of your VCR or DVD Player.
5. CONNECTING DIGITAL AUDIO SYSTEM
Connect a fiber optic cable between DIGITAL AUDIO OUT on the receiver and
Optical SPDIF on the Digital Audio System.
6. INSERTING SMARTCARDS FOR NAGRAVISION SERVICES
In order to view a scrambled service, you need to have the appropriate a valid
Smartcard. This STB has the NAGRAVISION CAS embedded to view NAGRAVISION
programmes.
N No otte e : Insert the Smartcard with the gold coloured chip facing downwards.
Connecting Figure
CONNECTING YOUR "STB"
MF68-00374A_GB 10/21/05 2:32 PM Page 4