Samsung UE55C9000SW - Instrukcja (Strona 14)

14
English
Connections
Connecting to an Audio Device
Using an Optical (Digital) Cable Connection
Available devices: digital audio system, amplifier, DVD home theatre
✎
DIGITAL AUDIO OUT (OPTICAL)
x When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
of both the TV and the system.
x 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
x When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is
a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is
connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to
hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite
receiver directly to an amplifier or home theatre.
OPTICAL
digital audio system
CONNECTIONS COMMON INTERFACE Slot
To watch paid channels, the “CI or CI+ CARD” must be inserted.
y If you don’t insert the “CI or CI+ CARD,” some channels will
display the message “Scrambled Signal”.
y The pairing information containing a telephone number, the “CI or
CI+ CARD” ID the Host ID and other information will be displayed
in about 2~3 minutes. If an error message is displayed, please
contact your service provider.
y When the configuration of channel information has finished, the
message “Updating Completed” is displayed, indicating the
channel list is updated.
✎
NOTE
x You must obtain a “CI or CI+ CARD” from a local cable service provider.
x When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may
cause damage to it.
x Insert the “CI or CI+ CARD” in the direction marked on the card.
x The location of the COMMON INTERFACE slot may be different depending on the model.
x “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.
x If you have any problems, please contact a service provider.
x Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be
seen.
[UC9000]BN68-02820B-XH-1.indb 14 2010-05-24 오후 1:58:12