LG MCD23 - Instrukcja (Strona 30)

10
Setting the Clock
1. Press for at least 2 seconds:
2. Choose from either: AM 12:00 (for an am and pm dis-
play) or 0:00 (for a 24 hour display).
3. Confirm your selection:
4. Select the hours:
5. Press:
6. Select the minutes:
7. Press:
ON PLAYER
CLOCK
. / >
SET
. / >
SET
. / >
SET
Use your player as an alarm clock
Press and hold TIMER on the player for two seconds. Each function, TUNER,
CD, USB flashes for two seconds. Press SET on the player when the function
you want to be woken by is showing. If you choose TUNER you will be shown
the stations you have saved as presets. Use
. / > on the player to select
the station you want, then press SET on the player.
You will be shown the ON TIME display. This is where you set the time you want
the alarm to go off. Use
. / > on the player to change the hours and min-
utes and SET on the player to save. You will then be shown the OFF TIME dis-
play. This is where you set the time you want the function to stop. Use
. / >
on the player to change the hours and minutes and press SET on the player to
save.
Next you will be shown the volume (VOL) you want to be woken by. Use
. /
> on the player to change the volume and SET on the player to save. Switch
the system off. The clock icon shows that the alarm is set.
When the system is turned off you can check the time the alarm is set for by
pressing TIMER on the player. You can also turn the alarm on and off by press-
ing TIMER on the player. To set the alarm to go off at a different time, switch the
system on and reprogramme following the same steps as initially.
NOTES :
• It is recommended to put a disc on the first tray when you select the CD on
timer setting.
• When you set the timer on CD/USB mode as CD/USB is not put on the player,
the unit is automatically into TUNER mode.
Fall asleep while listening to your player
Press SLEEP on the remote control one or more times to select delay time
between 10 and 180 minutes, after the player will turn off. Press SLEEP on the
remote control repeatedly, the display changes in the following order, correspon-
ding icons & dimmer ON
→ SLEEP 180 (dimmer ON) → SLEEP 150 (dimmer
ON) → SLEEP 120 (dimmer ON) → SLEEP 90 (dimmer ON) → SLEEP 80 (dim-
mer ON) → SLEEP 70 (dimmer ON) → SLEEP 60 (dimmer ON) → SLEEP 50
(dimmer ON) → SLEEP 40 (dimmer ON) → SLEEP 30 (dimmer ON) → SLEEP
20 (dimmer ON) → SLEEP 10 (dimmer ON) → SLEEP OFF & (dimmer OFF).
VSM (Virtual Sound Matrix)
You can select the Virtual sound. Press VSM on the remote control to set the
virtual sound.
• BYPASS : Software with multichannel surround audio signals is played
according to the way it was recorded.
• VIRTUAL : Realtime 3D positioned sound rendering technology with stereo
sources, optimized for stereo speakers. Listeners may experience amazing
virtual surround effects with their own multimedia players.
• ON STAGE : The sound fills Concert hall.
Tape Recording
Record from a CD, USB, PORTABLE or radio to cassette
Wind the tape to the point recording starts. Use only normal tapes.
1. Open the TAPE door: Insert a blank tape:
2. Close the TAPE door:
3. Select a mode in which you want to record:
Start playing the source you want to record.
4. Start the Recording:
5. To stop a Recording:
ON PLAYER
x x Z
CD, TUNER, USB
or PORTABLE
z z and B B
x x Z
CD to Tape Synchronized Recording
The CD synchro recording function dubs a complete CD and programmed
titles automatically into a cassette.
1. Open the TAPE door: Insert a blank tape:
2. Close the TAPE door:
3. Select the CD function:
4. Start the Recording: The synchronized recording is
started automatically after about 7 seconds.
5. To stop a Recording:
ON PLAYER
x x Z
CD
z z and B B
x x Z → x x