LG MCD23 - Instrukcja (Strona 29)

9
USB direct Recording
Record FM, AM, TAPE or PORTABLE source to USB
Connect USB to the player before recording.
1. Select a mode (FM, AM, TAPE or
PORTABLE) in which you want to
record: Start playing the source you
want to record.
2. Start the Recording:
3. To stop a Recording:
ON PLAYER ON REMOTE
TUNER, TAPE
or
PORTABLE
R (USB Rec.)
x x
FUNCTION
or
INPUT
REC
x x
Record CD source to USB
You can record one desired track or all of the music tracks in CD to
USB.
1. Select the CD function:
2. Select the track:
3. Start the Recording:
4. To stop a Recording:
ON PLAYER
CD
. / >
R (USB Rec.)
x x
ON REMOTE
FUNCTION
.bb / BB>
REC
x x
NOTES :
• Remove USB while recording, the recorded file may not be saved.
• Press R (USB Rec.) on the player or REC on the remote control for longer
than 3 seconds, you can select bit rate. Press . / > on the player or
.bb / BB> on the remote control select the bit rate and R (USB Rec.) or
REC again to select the recording speed . Press . / > or .bb / BB>
to select a desired recording speed and R (USB Rec.) or REC again to finish
recording.
X 1 SPEED -You can listen to music while recording it.
X 2 SPEED (Only 96kbps, 128kbps)
- You can just recording the music file. (Only Audio CD)
• When you select CD function, and then press R (USB Rec.) on the player or
REC on the remote control as not selecting any tracks, all music files in CD are
recorded.
• Set programs by using PROGRAM/MEMO and press R (USB Rec.) on the
player or REC on the remote control, you can record desired songs on CD in
order.
• When set sleep mode to on, recording stops at the previously set time and
then the player is turned off.
• For the file recorded in USB, up to 16 characters can be entered in setting file
names (include a space).
Playing music using USB
Listen to your tracks again and again
Press MODE repeatedly, the display changes in the following order, OFF →
RPT 1 → RPT ALL → RANDOM.
NOTES :
• Some portable devices are not compatible with this system.
• When various cards are connected to the Memory Card Reader, the first
detected card is recognized.
• Do not extract the USB device in operating.
• A back up demands to prevent a data damage.
• If you use a USB extension cable or USB hub, the USB device might not be
recognized.
• A device using NTFS file system is not supported (Only the FAT (16/32) file
system is supported.).
• The USB function of this unit does not support all USB devices.
• Digital camera and mobile phones are not supported.
• The player supports at most 99 folders.
• This player is not supported when the total number of files is 1000 or more.
• USB port of the unit can not be connected to PC. The unit can not be used as
a storage device.
The advantage of connecting your portable USB player through the
system’s USB port is that the portable device can be controlled from the
system.
1. Connect the portable player to the
system using a USB cable (not
supplied):
2. Select the USB function: The dis-
play will show READ, followed by the
number of files displayed:
3. Start the USB playing:
4. To stop a USB playing:
5. Before disconnecting the portable
USB player, change to any other
function by pressing:
6. Remove the USB player:
ON PLAYER ON REMOTE
USB
B B / []
x x
CD, TUNER, TAPE
or
PORTABLE
INPUT
B B / []
x x
FUNCTION
or
INPUT