MPM 30-MBV-02 - Instrukcja (Strona 12)

12
UK
4. Method of operation
• Put articles into the refrigerator 5 to 6 hours after switch on and inside chamber is cooled
down.
• The shelves can be freely adjusted conducive to store articles with various sizes.
• The refrigerator mounted a microprocessor controlled thermostat. The temperature in
the solid door refrigerator is 0-10 °C when working under the environmental temperature
is below 32 °C.The temperature in the Glass door refrigerator is 6-15 °C when working
under the environment temperature is below 32 °C
• 4. There is a light inside the chamber of the refrigerator; the light will be automatically on
when the door of the refrigerator is open.
DISCONNECT THE POWER SUPPLY BEFORE REPLACING THE LIGHT!
Steps for replace light are as follows: unplug the power plug; remove the transparent light cover
on the top of inside chamber; turn the burnt light anti-clockwise and take the burn light out; fit
a new light and turn tight clockwise; put the light cover back.
There is frost inside the refrigerator
POSSIBLE CAUSES SOLUTIONS (FOR USERS)
SOLUTIONS (FOR MANU-
FACTURE SERVICE)
The door of the refrigerator is not
tightly closed
Close the door tightly
Check if the door have door
gasket, if necessary to change
new door.
Water tank
1 – plug, 2 – control circuit, 3 – temperature sensor,
4 – heater