MPM 30-MBV-02 - Instrukcja (Strona 10)

10
UK
1. Cautions
• The refrigerator should use a separate special power socket. The power socket must
meet the requirements of relevant safety laws and rules.
• Make sure that the cooling system (it will be hot during operation) on the back side of
the refrigerator should not be touched by anyone unexpectedly.
• The outside refrigerator should not be spattered with water.
• Storage of explosive, combustibles, volatile dangerous goods and corrosive acid and
alkali in the refrigerator are prohibited.
• The inside temperature of the refrigerator is over 0°C , please do not put the articles to
be frozen into the refrigerator.
In case of trouble or abnormal phenomena, please contact our service department or dealer
for service without delay. Do not dismantle the refrigerator without authorization.
2. Proper placement
• The proper placement of the refrigerator is shown as figure 1 to keep good heat
exchange effect of the refrigerator.
• In case of built-in placement (for example in restaurant, hotel), enough ventilation
space are required, shown as A, B, C, D and E in figure 2. The area of the admission
inlet and exhaust outlet should not be less than 250 cm
2 to ensure smooth flow of air
admission and exhaust, do not put the refrigerator into a closed cabinet.
1 – Ventilation grid, 2 – Admission, 3 – Exhaust Attention.
The area of space around the ventilation grid (1) should be least 250 cm
2 .