Sony BRAVIA 4-146-428-51(1) - Instrukcja (Strona 34)

34 GB
Programme Sorting Changes the order in which the analogue channels are stored on the unit.
1
Press F/f to select the channel you want to move to a new position, then press
.
2
Press F/f to select the new position for your channel, then press .
Manual Programme
Preset Before selecting “Label/AFT/Audio Filter/LNA/Skip”, press PROG +/– to select
the programme number with the channel. You cannot select a programme number
that is set to “Skip” (page 32).
Programme/
System/Channel Presets programme channels manually.
1
Press F/f to select “Programme”, then press .
2
Press F/f to select the programme number you want to
manually tune (if tuning a VCR/ DVD recorder, select
channel 00), then press
RETURN.
3
Press F/f to select “System”, then press .
4
Press F/f to select one of the following TV broadcast
systems, then press RETURN.
B/G: For western European countries
I: For the United Kingdom
D/K: For eastern European countries
L: For France
5
Press F/f to select “Channel”, then press .
6
Press F/f to select “S” (for cable channels) or “C” (for
terrestrial channels), then press g.
7
Tune the channels as follows:
If you do not know the channel number
(frequency)
Press
F/f to search for the next available channel. When
a channel has been found, the search will stop. To
continue searching, press
F/f.
If you know the channel number (frequency)
Press the number buttons to enter the channel number of
the broadcast you want or your VCR/DVD recorder
channel number.
8
Press to jump to “Confirm”, then press .
9
Press f to select “OK”, then press .
Repeat the procedure above to preset other channels
manually.
Label Assigns a name of your choice, up to five letters or numbers,
to the selected channel. This name will be displayed briefly
on the screen when the channel is selected.
To input characters, follow steps 1 to 3 of “Edit:” (page 32).
AFT Allows you to fine-tune the selected programme number
manually if you feel that a slight tuning adjustment will
improve the picture quality.
You can adjust the fine tuning over a range of –15 to +15.
When “On” is selected, the fine tuning is performed
automatically.