Sony BRAVIA 4-146-428-51(1) Instrukcja Obsługi
Strona 25
 
25
GB
Usin
g O
p
tion
al Eq
uipm
ent
Connect to
Input symbol on 
screen
Description
1
/
AV2
AV2
When connecting mono equipment, connect to the
L
socket.
2
/
COMPONENT IN
Component
The component video sockets support the following video 
inputs only: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p.
3
/
AV1
AV1
When you connect a decoder, the TV tuner outputs scrambled 
signals to the decoder, and the decoder unscrambles the 
signals before outputting them.
4
DIGITAL AUDIO 
OUT (OPTICAL)
Use an optical audio cable.
~
• No sound is output in the monitor mode.
5 8
RF input that connects to your cable TV system or VHF/UHF.
6 ! DC IN 18V
Connects the supplied mains adaptor.
7
(RGB)/
PC IN
PC
It is recommended to use a PC cable with ferrites, such as the 
“Connector, D-sub 15” (ref. 1-793-504-13, available in Sony 
Service Centre) or equivalent.
8 HDMI IN 1/2/3,
MONITOR HDMI 
IN
HDMI 1/
HDMI 2/ 
HDMI 3/
MONITOR 
HDMI
Digital video and audio signals are input from the connected 
equipment.
In addition, when you connect the equipment that is 
compatible with control for HDMI, communication with the 
connected equipment is supported. Refer to page 33 to set up 
this communication.
~
• The HDMI sockets support the following video inputs only:
480i, 480p, 576i, 576p, 720p, 1080i, 1080p and 1080/24p 
(1080/24p is for MONITOR HDMI only). For PC video 
inputs, see page 48.
• Be sure to use only an authorised HDMI cable bearing the
HDMI logo.We recommend that you use a Sony HDMI 
cable (high speed type).
• For HDMI 1/2/3, when connecting an audio system that is
compatible with control for HDMI, be sure to also connect 
it to the DIGITAL AUDIO OUT (OPTICAL) socket.
9 IR BLASTER
Connects the supplied IR Blaster cables.
0
CAM
(Conditional 
Access Module)
To use Pay Per View services.
For details, refer to the instruction manual supplied with your 
CAM. To use the CAM, remove the “dummy” card from the 
CAM slot, then turn off the monitor and insert your CAM card 
into the slot. When you are not using the CAM, we recommend 
that you keep the “dummy” card in the CAM slot.
~
• CAM is not supported in all countries. Please check with
your authorised dealer.
• If the CAM card becomes jammed while inserting, try
again. Do not insert forcefully.
qa i Headphones
You can listen to monitor sound through headphones.
qs
USB
You can enjoy photo files stored in a Sony digital still camera 
or camcorder through a USB cable or USB storage device on 
your unit (page 27).
qd SERVICE ONLY
For service use only.