Silvercrest BLUETOOTH KH 2376 - Instrukcja (Strona 35)

37
Troubleshooting
Bluetooth Car Radio KH 2376
GB Defect Possible cause Solution
The radio and/
or the automatic
station saving is
not functioning The antenna cable is not
connected correctly. Check the antenna cable for correct
connection.
The station signals are
too weak.
Set the station manually.
Station memory is
not functioning
The connection 4 in the
ISO block A (Permanent
positive) is not connected
correctly.
Check the cable connections. For this
consult the chapter "Connections".
The device's USB port
does not function
The USB port is intended
for devices that function
according to the USB
standard. Not all market
available devices con-
form to this standard. It is
possible that a device is
connected that does not
function according to the
USB standard.
Connect a device that functions ac-
cording to the USB standard. Make
sure that the data carrier is formatted
for the FAT32 fi le system.
The card reading
device does not read
the cards The card is possibly
defective, dirty or not
properly inserted.
Check the card. Slide it in with the in-
scribed side facing to the right. Make
sure that the data carrier is formatted
for the FAT32 fi le system.
The Bluetooth connec-
tion does not function
The mobile telephone
does not support
Bluetooth transmissions.
Reconnect the mobile telephone
and the device. For this also read,
without fail, your mobile telephone's
instructions.
The mobile telephone is
not coupled with
the device.
NOTICE
If you cannot solve the problem with the aforementioned methods please ►
contact customer service.
B_KH2376_33301_LB4A indb Abs5 37 17 07 2009 14 13 55 Uhr