AVer CP355 user manual - Instrukcja (Strona 22)

Nazwa Funkcja
obrazu).
(7) MENU Wyświetla lub zamyka menu ekranowe (OSD) lub
bieżące podmenu.
(8) PLAYBACK View the captured image from the memory in
16-thumbnail images.
Use ▲,▼,◄, & ► to make a selection and ENTER to
view the selected image in full screen. To zoom in and out
the image, turn the shuttle wheel clockwise and
counter-clockwise.
To start slide show, press MENU, select START and
press ENTER to begin and end. Select INTERVAL to set
the display time interval between frames in second.
To change the slide show time interval, select INTERVAL,
press ENTER and the bar will turn red, use ◄ & ► to
increase and decrease the value, and then press ENTER
to save the setting and the bar will turn white.
(9) CAMERA/PC Switch between Camera and PC mode.
- Camera mode displays the video signal from the built-in
camera.
- PC mode displays the video signal from the RGB
INPUT port of CP355.
(10) AUTO
FOCUS
Automatycznie reguluje ostrość obrazu.
(11) AUTO
IMAGE
Automatycznie dostraja naświetlenie obrazu i ustawia na
optymalnym poziomie równowagę jego barw składowych.
(12) CAP/DEL - Capture a still image in Camera mode. The captured
image is saved in the memory and can store up to 80
images. The image size can be saved either in 1024 x
768 (default) or 2016 x 1520 pixels.
If the Capture setting is in Continuous mode, use
CAP/DEL button to start and stop successive still image
capture. To stop continuous capture, press CAP/DEL
button when “SAVE” message in the status box at the
lower right corner of the screen disappear.
To set the image size of your choice, press MENU,
select CAPTURE in IMAGE menu list, press ENTER,
select IMG SIZE, press ENTER, use ▲ and ▼ to make
a selection, and press ENTER to save the setting.
- Remove the selected picture from the built-in memory
permanently in Playback mode.
18