Indesit XWA-61051-W-PL - Instrukcja (Strona 20)

20
GB
Wash cycles
Table of wash cycles
Push & Wash
This function allows for starting a wash cycle even when the machine is switched off without having to press the ON/OFF
button in advance, or after switching on the machine, without having activated any button and/or selector (otherwise, the
Push & Wash function will be deactivated). To start the Push & Wash cycle press and hold the relative button for 2 seconds.
The lit indicator light indicates that the cycle has started. This wash cycle is ideal for cotton or synthetic fabrics, as it washes
at a temperature of 30° and a maximum spin speed of 800 rpm. Maximum load 3,5 kg. (Cycle duration 50’).
How does it work?
1. Load the laundry (cotton and/or synthetic garments) and close the door.
2. Pour the detergent and additives.
3. Start the programme by pressing and holding the Push & Wash button for 2 seconds. The relative indicator light turns
green and the door will lock (the DOOR LOCKED symbol turns on).
N.B.: starting the wash cycle through the Push & Wash button activates an automatic non-customisable cycle
recommended for cotton and synthetic fabrics. This programme does not allow for setting any additional options.
To open the door while an automatic cycle is under way, press the START/PAUSE button; if the DOOR LOCKED symbol
is switched off the door may be opened. Press the START/PAUSE button again to restart the wash cycle from the point at
which it was interrupted.
4. Once the programme is finished, the END indicator light turns on.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor-
ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle 8 with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should
be used for garments which can be washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle 9 with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should
be used for garments which can be washed at 40°C. The actual washing temperature may differ from the indicated value.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle 9 with a temperature of 40°C.
3) Synthetic program along: set wash cycle 10 with a temperature of 40°C.
W
as
h
cy
cl
es
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergents
M
ax
. l
oa
d
(k
g)
R
es
id
ua
l
da
m
pn
es
s
%
E
ne
rg
y
co
ns
um
pt
io
n
kW
h
To
ta
l w
at
er
lt
C
yc
le
d
ur
at
io
n
P
re
w
as
h
W
as
h
F
ab
ri
c
so
ft
en
er
B
le
ac
h
Special
1 Sport 30° 600 -   - 3,5 - - - 55’
2 Dark 30° 800 -   - 4 - - - 70’
3 Anti-odour (Cotton) 60° 1000 -   - 3,5 - - - 110’
3 Anti-odour (Synthetic) 40° 1000 -   - 3,5 - - - 100’
4 Delicate 30° 0 -   - 1 - - - 80’
5 Wool: for wool, cashmere, etc. 40° 800 -   - 1,5 - - - 70’
6 Duvet: for down-stuffed garments. 30° 1000 -   - 2 - - - 110’
Standard
7 Cottons with Pre-wash: extremely soiled whites. 90° 1000    - 6 62 2,15 77 170’
8 Cotton Standard 60° (1): heavily soiled whites and resistant colours.
60°
(Max. 90°)
1000 -   - 6 62 1,05 50 195’
9 Cotton Standard 40° (2): lightly soiled whites and delicate colours. 40° 1000 -   - 6 62 0,86 69 180’
10 Synthetic: heavily soiled resistant colours. 60° 800 -   - 3,5 46 0,79 46 110’
10 Synthetic (3): lightly soiled resistant colours. 40° 800 -   - 3,5 46 0,56 46 100’
11 Coloured 40° 1000 -   - 6 62 0,89 70 100’
Eco & Rapid
12 Cotton Standard 20°: lightly soiled whites and delicate colours. 20° 1000 -   - 6 - - - 170’
13 20’ Refresh 20° 800 -   - 1,5 - - - 20’
14 Rapid 60’ 60° 1000 -   - 6 - - - 60’
Partials
Rinse/Bleach
- 1000 - -   6 - - - 50’
Spin + Drain - 1000 - - - - 6 - - - 25’