Indesit I5GG(X)-U - Instrukcja (Strona 7)

7
GB
Table of burner and nozzle specifications
S S
R A
WARNING
To remove the sliding protection “A”, unscrew screw
“S”. When you have finished, replace the protection
and lock it in place with screw “S”.
Before using the oven, make sure the sliding protection
“A” is fastened in the correct position.
TECHNICAL DATA
Oven dimensions
(HxWxD)
34x39x 44 cm
Volume 58 l
Useful
measurements
relating to the oven
compartment
width 42 cm
depth 44 cm
height 18 cm
Power supply voltage
and frequency
see data plate
Burners
may be adapted for use with any
type of gas shown on the data
plate, which is located inside the
flap or, after the oven
compartment has been opened,
on the left-hand wall inside the
oven.
EC Directives: 2006/95/EC dated
12/12/06 (Low Voltage) and
subsequent amendments -
2004/108/EC dated 15/12/04
(Electromagnetic Compatibility)
and subsequent amendments -
90/396/EEC dated 29/06/90 (Gas)
and subsequent amendments -
93/68/EEC dated 22/07/93 and
subsequent amendments -
2002/96/EC.
Table 1 (for Poland) G20 (GZ50) G2.350 (GZ35) G30 (GPB)
Burner Diameter
(mm)
Thermal
Power
(p.c.i.*)
kW
Nozzle
1/100
(mm)
Flow*
l/h
Nozzle
1/100
(mm)
Flow*
l/godz
Thermal
Power
(p.c.i.*)
kW
Nozzle
1/100
(w mm)
Flow*
g/godz
Fast (Large)(R)
100 3,00 128 286 158 397 3,40 87 247
Semi Fast
(Medium)(S)
75 1,90 104 181 143 251 2,20 70 160
Auxiliary (Small)(A) 51
1,00
76 95 106 132 1,30 52 95
Oven - 2,80 119 267 171 370 3,20 80 233
Supply Pressures
MINIMUM (mbar)
NOMINAL (mbar)
MAXIMUM (mbar)
16
20
25 10
13
16 29
37
44
* At 15°C 1013 mbar – dry gas
G20 (GZ50) p.c.i. = 37,78 MJ/m³
G2.350 (GZ35) p.c.i. = 27,20 MJ/m³
G30 (GPB) p.c.i. = 125,81 MJ/m³
(X)
S
A
I5GG /U
ENERGY LABEL
and ECODESIGN Regulation (EU) No 65/2014 supplemen-
ting Directive 2010/30/EU.
Regulation (EU) No 66/2014 implementing
Directive 2009/125/EC.
Standard EN 15181.
Standard EN 30-2-1