Indesit I5GMH6AG(A)-U - Instrukcja (Strona 16)

GB
16
*
Only available in certain models.
Timer feature
This function may be accessed by pressing the 
button, after which the display will show the symbol

. Every time the + button is pressed it corresponds
to a time increase of 10 seconds, until it reaches 99
minutes and 50 seconds. After this point, each press of
the button represents an increase of one minute, up to a
maximum of 10 hours.
Pressing the - button reduces the time.
After the time period has been set, the timer will begin
to count down. When the timer reaches zero, the
buzzer will sound (this may be stopped by pressing
any button).
The time may be displayed by pressing the

button,
and the  symbol indicates that the timer function has
been set. After approximately 7 seconds, the display will
automatically revert to the timer.
Cancelling a time that has already been set
Press the - button until the display shows 0:00.
Adjusting the buzzer volume
After selecting and confirming the clock settings, use
the - button to adjust the volume of the alarm buzzer.
Planning cooking with the electronic
programmer*
Setting the clock
After the appliance has been connected to the
power supply, or after a blackout, the display will
automatically reset to 0:00 and begin to blink. To set
the time:
1. Press the COOKING TIME button
and the
COOKING END TIME simultaneously.
2. Within 4 seconds of having pressed these buttons,
set the exact time by pressing the + and - buttons.
The + button advances the hours and the

- button
decreases the hours.
Once the time has been set, the programmer
automatically switches to manual mode.
Setting the timer
The timer enables a countdown to be set, when the
time has elapsed a buzzer sounds.
To set the timer proceed as follows:
1. press the TIMER button
. The display shows:
 .
2. Press the + and - buttons to set the desired time.
3. When the buttons are released the timer begins
Electronic timer*
This function displays the time and works as a timer
which counts down to zero.
! All functions will be implemented approximately 7
seconds after they have been set.
Resetting the clock
After the appliance has been connected to the power
supply, or after a power cut, the clock display will
begin to blink, showing the figure: 0:00
• Press button

and then buttons - and + to set the
exact time. Press and hold the buttons to quicken
the count upwards.
Any necessary modifications can be made by
repeating the above process.
counting down and the current time appears on the
display.

4. After the time has elapsed a buzzer will sound, and
this can be switched off by pressing any button (except
the + and - buttons). The symbol
 will switch off.
!
The timer does not switch the oven on or off.
Adjusting the volume of the buzzer
After selecting and confirming the clock settings, use
the - button to adjust the volume of the alarm buzzer.
Setting the cooking time with a delayed start
First decide which cooking mode you wish to use and
set a suitable temperature using the SELECTOR and
THERMOSTAT knobs on the oven.
At this point it is possible to set the cooking time:
1. Press the COOKING TIME button
.
2. Within 4 seconds of having pressed this button, set
the desired amount of time by pressing the + and -
buttons. If, for example, you wish to set a cooking time
of 30 minutes, the display will show:
