Samsung LE46C653M2W - Instrukcja (Strona 36)

36
English
Advanced Features
Anynet +
What is Anynet + ?
t
Anynet + is a function that enables you to control all connected Samsung devices that support Anynet + with your Samsung TV’s
remote. The Anynet + system can be used only with Samsung devices that have the Anynet + feature. To be sure your Samsung
device has this feature, check if there is an Anynet + logo on it.
To connect to Home Theatre
1. Connect the HDMI IN (1(DVI), 2, 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet + device using
an HDMI cable.
2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet + device using an
HDMI cable.
NOTE
✎
Connect the Optical cable between the x DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input
on the Home Theatre.
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound
x
from the Home Theatre’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio,
connect the
DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / satellite box (i.e. Anynet Device 1 or 2) directly to the
Amplifier or Home Theatre, not the TV.
Connect only one Home Theatre.
x
You can connect an Anynet x + device using the HDMI cable. Some HDMI cables may not support Anynet + functions.
Anynet x + works when the AV device supporting Anynet + is in the standby or on status.
Anynet x + supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
Anynet + Menu
The Anynet + menu changes depending on the type and status of the Anynet + devices connected to the TV.
Anynet + Menu Description
View TV Changes Anynet + mode to TV broadcast mode.
Device List Shows the Anynet + device list.
Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
(device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Stop Recording: (*recorder) Stops recording.
Receiver Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
Anynet + Device 1
HDMI 1.3 Cable
HDMI 1.3 Cable
TV
Optical Cable
Home Theatre Anynet + Device 2, 3, 4
BN68-02558A.indb 36 2010-02-22 �� 8:00:48