LG LGE960 - Instrukcja (Strona 38)

 Nexus 4 quick start guide Nexus 4 quick start guide 
Insert micro SIm card & turn on phone
Before you start using your phone, you may need to
insert your Micro siM card. if no card is installed, the
message “No siM card” appears on the phone’s lock
screen.
eject
button
aperture
the siM card tray is located on the left side of the
phone below the volume button. the eject button is a
small round aperture just above the tray door. to install
a new Micro siM card:
insert the siM ejection tool that comes with the
phone (or a thin pin) into the eject button aperture,
and push firmly but gently until the tray pops out. 1.
remove the tray and place the micro siM card inside
it, with the contacts out and the angled corner to the
right. There is only one possible way to fit the card
snugly into the tray.
carefully reposition the tray in the slot and push it
gently back into the phone.
tIp: Your phone’s IMEI identification number is
on the siM card tray. You may need this number
later to identify your phone for service purposes.
Write the iMei number down in your qsg or take a
photo of the label on the product box.
to turn on your Nexus , press and hold the Power
button on the right edge near the top for a few seconds.
Power/
Lock key
2.
3.