LG LGE610 - Instrukcja (Strona 139)

23
NOTE:
While charging, the device may heat up. This is normal and should not
affect the device’s lifespan or performance. If the battery gets hotter than
usual, the charger may stop charging.
•
After fully charging, disconnect the device from the charger. First unplug the charger
from the device, and then unplug it from the electric socket. Do not remove the battery
before removing the charger. This may damage the device.
NOTE: To save energy, unplug the charger when not in use. You must unplug
the charger from the electric socket when not in use to avoid wasting power.
The device should remain close to the electric socket while charging.
Reducing the battery consumption
Your device provides options that help you save battery power. By customising these
options and deactivating features in the background, you can use the device longer
between charges:
Activate power-saving mode.
When you are not using the device, switch to sleep mode by pressing the Power/lock
key.
Close unnecessary applications with the task manager.
Deactivate the Bluetooth feature.
Deactivate the Wi-Fi feature.
Deactivate auto-syncing of applications.
Decrease the Screen timeout.
Decrease the brightness of the display.
•
•
•
•
•
•
•
•
The charger connector is at the bottom of the phone. Insert the charger and plug it into
an electrical outlet.
NOTE:
The battery must be fully charged initially to improve battery lifetime.
Do not open the battery cover while your phone is charging.
When the battery power is low, the device emits a warning tone and
displays a low battery power message.
If the battery is completely discharged, the device cannot be turned on
immediately when the charger is connected. Allow a depleted battery to
charge for a few minutes before turning on the device.
If you use multiple applications at once, network applications, or
applications that need a connection to another device, the battery will drain
quickly. To avoid disconnecting from the network or losing power during a
data transfer, always use these applications after fully charging the battery.
The device can be used while it is charging, but it may take longer to fully
charge the battery.
If the device receives an unstable power supply while charging, the touch
screen may not function. If this happens, unplug the charger from the
device.
•
•
•
•
•
•
•
Getting to know your phone