MPM 07-KPO-01 - Instrukcja (Strona 12)

12
GB
THE MANUFACTURER WILL NOT ASSUME ANY RESPONSIBILITY IN CASE OF NON
ADHERENCE TO THESE INSTRUCTIONS.
KEEP THIS USER MANUAL CAREFULLY.
INSTALLATION
Selection of installation location
Keep the unit on a flat surface and dry place.
Leave at least 50cm space all around the unit.
Installation
Fix the exhaust pipe into the adapter, and then fix the other side of the exhaust pipe into the air outlet
vent of the unit. (anti-clockwise)
Fix the adapter into the window slider kit, then half open the window to meet the width of the window
slider kit. The length of the window slider kit is adjustable.
Incorrect mounting
The bend of the exhaust pipe is very important.
Incorrect mounting can prevent the machine from
working correctly.
Take care to prevent any sharp bows or bends of the
exhaust pipe.
The exhaust air must flow freely。
WARNING
The length of the exhaust pipe is specially designed according to the specification of this
product. Do not replace or prolong it with your own private hose as this could cause
mal-function.
BE CAREFUL: Use the shortest possible length which is 1500mm. When mounting, we
advise to keep the exhaust pipe in a horizontal position.
PART NAME
Front
1. Air outlet vent
2. Louver
3. Control panel
4. Knob
5. Castor
6. Handle
instrukcja_MPM-09-KPO-02.indd...12 2011-01-10...11:16:27