Candy GO 126TXT-42S - Instrukcja (Strona 35)

Installation
After removing the machine from the packaging, proceed as
follows:
On the back of the machine
1) Carefully cut the securing strap that holds the main cord
and the drain hose.
2) Remove the 4 fixing screws marked (A) and remove the
4 spacers marked (B)
3) Cover the 4 holes using the caps provided in the
instruction booklet pack.
4) Fix the sheet of corrugated material on the
bottom as shown in picture.
5) Use the 4 feet to level the machine with the floor:
a) Turn the nut clockwise to release the screw adjuster of
the foot.
b) Rotate foot to raise or lower it until it stands firmly on the
ground.
c) Lock the foot in position by turning the nut anti-clockwise
until it comes up against the bottom of the machine.
69
Appliance complies with European Directives 73/23/EEC and 89/336/EEC, replaced by
2006/95/EC and 2004/108/EC, and subsequent amendments.
Technical data
■ Max. load of dry laundry
■ Water pressure
Measurements
■ Width
■ Depth
■ Height
NB: For specifications regarding electrical data, see the data panel on the front of the washing
machine (porthole area).
6 kg
(0,5 ÷ 10 bar)
0,05 ÷ 1 MPa
60 cm
52 cm
85 cm
Customer Service
The appliance is covered by a certificate of guarantee which allows you free use of the Candy
Technical Support Service. Remember to send off the guarantee certificate for validation
within 10 days of the date of purchase.
You should retain the receipt issued by the retailer when you purchased the machine to show
to the call out engineer, should you need to consult one.
If your washing machine shows signs of a defect or is not working properly, before you contact
GIAS Service we recommend you carry out the checks detailed on page 66 within the Trouble
shooting section.
If the problem with the machine persists after completing all the recommended checks, please
dial the GIAS Service number on the rear cover of this manual.
For the cost of a telephone call, you will be connected directly to GIAS. It is important you tell
the GIAS advisor your product’s model number and serial number, which you will find on the
rating label (16 characters, beginning with the number 3), found on the front of the washing
machine (door area). By doing this, your enquiry will be responded to more efficiently.
68
Fig. 2
A
B
C
Note: we recommend you keep the spacers and screws to immobilise
the machine for future transit. The Manufacturers will not be
responsible for any possible damage to the machine caused by not
following the rules relating to releasing the mechanism. The user is
responsible for all costs of installation.