LG DZ9500 - Instrukcja (Strona 23)

23
Reference
Additional Information
COPYRIGHTS:
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public,
or rent copyrighted material without permission.
This product features the copy protection function developed by Macrovision.
Copy protection signals are recorded on some discs. When recording and playing the
pictures of these discs on a VCR, picture noise will appear.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Controlling other TVs with the remote control
You can control the sound level, input source, and power switch of your
LG TV with the supplied remote control.
You can control the sound level, input source, and power switch of
non-LG TVs as well. If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down TV POWER button, press the number buttons to
select the manufacturer code for your TV (see the table below).
2. Release TV POWER button.
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time
until you find the one that works with your TV.
Manufacturer Code Number
LG / GoldStar 1 (Default), 2
Zenith 1, 3, 4
Samsung 6, 7
Sony 8, 9
Hitachi 4
NOTES
• Depending on your TV, some or all buttons may not function on the TV, even
after entering the correct manufacturer code.
• If you enter a new code number, the code number previously entered will be
erased.
• When you replace the batteries of the remote, the code number you have set
may be reset to the default setting. Set the appropriate code number again.