Samsung TFT-LCD Monitor SMT-190P - Instrukcja (Strona 12)

E
USER’S MANUAL
- 12 -
D-SUB Connector Pin Assignments
PIN ASSIGNMENTS
Pin No. Pin Name Pin No. Pin Name
1 RED VIDEO 9 NC
2 GREEN VIDEO 10 SIGNAL CABLE DETECT
3 BLUE VIDEO 11 GROUND
4 GROUND 12 SDA(for DDC)
5 GROUND 13 H.SYNC(or H+V SYNC)
6 RED GROUND 14 V-SYNC
7 GREEN GROUND 15 SCL(for DDC)
8 BLUE GROUND
D-SUB
Troubleshooting Guide
The screen doesn’t show
up.
The screen is too light or
too dark.
The screen size is not fit for
the VGA signal.
The screen color shows
strange in the VGA signal.
1. Make sure if the power supply is connected
properly.
2. Turn on the power.
3. Select the input signal right for the connected
port.
Control the brightness.
Press the AUTO button among buttons in the
front. (It is used only in the VGA signal.)
In the Setup menu of OSD menu, perform the
Auto Adjustment.
Troubleshooting Troubleshooting Tip
WEEE Symbols
Correct Disposal of This Product
(Waste Electrical &Electronic
Equipment)
(Applicable in the European Union and other
European countries with separate collection systems)
This marking shown on the product or its literature,indicates
that it should not be disposed with
other household wastes at the end of its working life.To
prevent possible harm to the
environment or human health from uncontrolled waste
disposal,please separate this from other
types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where
they purchased this product,or their
local government office,for details of where and how they
can take this item for environmentally
safe recycling.
Business users should contact their supplier and check the
terms and conditions of the purchase
contract.This product should not be mixed with other
commercial wastes for disposal.
SMT-171/SMT-190-ENG 12/8/05 9:40 AM Page 12